;//***HOME Page:
HOME_TIT = Welcome to the Schneider Automation Web Server
HOME_REF = Not referenced
HOME_OS = Operating System:
HOME_RES = Screen Resolution:
HOME_SRES = For better viewing, please change your screen resolution to:
HOME_BRO = Browser
HOME_BW1 = You will need to upgrade this browser to version 4.06 or later before using the Momentum I/O Web Server.
HOME_BW2 = You will need to upgrade this browser to version 4 SP2 before using the Momentum I/O Web Server.
HOME_JDK = This browser must be JDK 1.1 compatible to use the Momentum I/O Web Server.
HOME_JAV = Java not enabled on this browser!
HOME_WS = Momentum I/O Web Server
HOME_MCD = Momentum I/O Configuration and Diagnostics
HOME_JS = JavaScript not enabled on this browser.
HOME_JSW = It is recommended that JavaScript be enabled before using the Momentum I/O Web Server.
HOME_JEN = Java must be enable to use Momentum I/O Web Server.
HOME_BT = Schneider Automation Inc.

;***Index_1 Page
IND_TIT = Welcome to the FactoryCast Web Server for Momentum I/O
IND_HL = Configuration and Diagnostics
IND_HO = Home
IND_SEC = Security
IND_PRO = Momentum I/O Properties
IND_CIO = Configure Momentum I/O
IND_IOD = Momentum I/O Diagnostics
IND_SUP = Support

;***entconf_main Page
;Configure Momentum I/O
CM_CIP = Configure IP Parameters
CM_CAP = Configure Communication Adapter Parameters
CM_CSN = Configure SNMP

;***entdiag_main Page
;Momentum I/O Diagnostics
DM_EST = Ethernet Statistics
BM_FDR = Faulty Device Replacement Diagnostics
DM_LOG = System Log Diagnostics
DM_VAL = Momentum I/O Values

;***support Page
SUP_SPT = Schneider Automation Support
SUP_CON = Contacting Schneider Automation
SUP_ASS = There are numerous ways to reach us for assistance:
SUP_TEC = Technical Information
SUP_SUC = Visit the Schneider Automation web site
SUP_TAS = Technical Assistance
SUP_THLP = If you need technical assistance with a product or service, contact us by email at <a href="mailto:customercentral@schneiderautomation.com">customercentral@schneidera utomation.com, or contact your local Sales Office
SUP_NOT = Note: Be sure to supply your name, telephone number, company name and address within your email to assure an immediate response
SUP_FBK = Feedback
SUP_THO = Thoughts, comments, ideas about this product? Please let us know by contacting us at <a href="mailto:feedback@modicon.com">feedback@modicon.com
SUP_TFP = Other Transparent Factory Products
SUP_VIS = Visit our Transparent Factory web site.

;******The rest  for cgi  return pages  ***********/

;***ioproperties Page
IOP_NON = None
IOP_UNK = UNKNOWN
;Momentum I/O Properties
IOP_STA = Momentum Communication Adapter Status:
IOP_ATT = Momentum I/O Module Attributes:
IOP_ADR = Address-Range
IOP_SW = Status Words:
IOP_IW = Input Words:
IOP_PW = Parameter Words:
IOP_OW = Output Words:
IOP_CA = Communication Adapter:
IOP_DRO = Momentum I/O Drop:
IOP_KER = Kernel Version:
IOP_PN = Adapter Part Number:
IOP_EXC = Exec Version:
IOP_SER = Adapter Ser. Number:
IOP_BPN = Base Part Number:

;***validate_ftp_password
CPW_ENT = Please Enter Your Password
CPW_PNC = Password is NOT correct!
PASSWORD = Please Enter Configuration password
TRY = Try again with correct password
PASS = Invalid Password
USER = Invalid Username
CONF_PASS = Configuration Password:

;***load_address_checkout
ADD_CHK = Invalid Address!

;***fdr page
IPC_RN = Role Name:
IPC_IPA = IP Address:
IPC_SUB = Subnet Mask:
IPC_GW = Gateway:
IPC_FT = Framing Type:
IPC_ETH = Ethernet II
IPC_IEE = IEEE 802.3
IPC_AF = Auto Framing
IPC_FALL = Fall Back to Stored IP Parameters in the absence of an address server.
IPC_DS = Display Stored
IPC_DC = Display Current
IPC_DFD = Display Factory Defaults
IPC_USV = Update Stored Values
IPC_CIP = Current IP Configuration
IPC_FIP = Factory Default IP Configuration
IPC_SIP = Stored IP Configuration
IPC_FSC = FDR Save Confirmation
IPC_FER = Error saving configuration to FDR server
IPC_RCC = Role Name Change Confirmation
IPC_RRQ = Role Name has been changed. System Reboot is required.
IPC_REB = Reboot Now
IPC_ICC = IP Change Confirmation
IPC_IPC = One of the IP Parameters has been changed.
IPC_SRRQ = The new parameters will NOT take effect until after system reboots.
IPC_RNOW = Would you like to reboot now?
IPC_RDEV = Reboot Device
IPC_CAN = Cancel
IPC_VGW = The gateway is not accessible through the subnet mask!
IPC_FIIL = Please make sure IP address and subnet mask fields are filled!
ROLENAME = Invalid Role Name  

;***snmp page
SNMP_SN = System Name:
SNMP_SD = System Description:
SNMP_DEF = Momentum I/O TCP/IP Communications Module
SNMP_MIP = Managers IP Addresses:
SNMP_MAN1 = Manager I:
SNMP_MAN2 = Manager II:
SNMP_AGEN = Agent:
SNMP_LOC = Location [SysLocation]:
SNMP_CTC = Contact [SysContact]:
SNMP_CMTY = Community:
SNMP_SEC = Security:
SNMP_SET = Set:
SNMP_GET = Get:
SNMP_TRP = Trap:
SNMP_AUT = Authentication Failure Trap Enabled
SNMP_RES = Reset The Form
SNMP_UPD = Update SNMP
SNMP_CUR = Current SNMP Configuration
SNMP_UCF = SNMP Update Confirmation
SNMP_CUS = SNMP Configuration updated successfully.
SNMP_ERR = Error saving configuration to FDR server

;***load_time_checkout
TIME_CHK = Invalid range!

;***Comm Adapter page
CA_IOC = I/O Configuration:
CA_RT = Reservation Time:
CA_VR = Valid Range
CA_HT = Holdup Time:
;zero equal to indefinite
CA_IND = 0=indefinite
CA_MIP = Masters IP Addresses:
CA_M1 = Master1 IP:
CA_M2 = Master2 IP:
CA_M3 = Master3 IP:
CA_APL = Apply
CA_SAVE = Save
CA_CUR = Current Communication Adapter Configuration
CA_FAC = Factory Default Communication Adapter Configuration
CA_STOR = Stored Communication Adapter Configuration
CA_CAC = Communication Adapter Apply Confirmation
CA_ASC = Configuration applied successfully.
CA_AERR = Error applying configuration.
CA_CASC = Communication Adapter Save Confirmation
CA_SSC = Configuration saved successfully.
CA_SERR = Error saving configuration to FDR server
CA_FALL = Fall Back to Stored Application Parameters in the absence of<br>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;an address server.

;*** system log page
;System Log Diagnostics
LOG_ENT = There are no entries in the System Log.
LOG_FILE = System Log File:
LOG_CLR = Clear System Log
LOG_CONF = System Log Confirmation
LOG_CSC = System Log File cleared successfully.

;*** security page
SEC_TIT = Change Web Access & Configuration Passwords
SEC_FCF = Please fill in the Configuration Password fields!
SEC_FWA = Please fill in the Web Access Password fields!
SEC_NEC = Enter New Configuration Password and Confirm New Configuration Password fields are NOT the same!.
SEC_NEWA = Enter New Web Access Password and Confirm New Web Access Password fields are NOT the same!
SEC_WAP = Change Web Access Password:
SEC_EWAP = Enter New Web Access Password:
SEC_CWA = Confirm New Web Access Password:
SEC_CCP = Change Configuration Password:
SEC_ENCP = Enter New Configuration Password:
SEC_CNCP = Confirm New Configuration Password:
;SEC_SAVE = Save
SEC_RES = Reset
SEC_CPCC = Configuration Password Change Confirmation
SEC_CPCS = Configuration Password changed successfully.
SEC_WPCC = Web Access Password Change Confirmation
SEC_RDB = Please click Reboot Now button to activate the new parameters.
SEC_RDEV = Reboot Device
SEC_ERWP = Error saving web access password.
SEC_ERCP = Error saving configuration password.
SEC_PRM = Web Access / Configuration Parameters Change Confirmation
SEC_ERRS = Error saving parameters.
SEC_USER = Enter New Web Access User Name:
SEC_FIELD = You haven't filled any field.

;********common
INTERNAL = Internal Error
INT_ERR = Internal error, try again.

;*** Clear All Conf Paramaters
CLR_TITLE = Clear All Configuration Parameters
CLR_WARNING = WARNING:  If you continue, all of the configuration parameters will be cleared to the FACTORY DEFAULT CONFIGURATION and the communications adapter will REBOOT.  Press OK to continue.  Press Cancel to abort this operation.
CLR_TEXT = All configuration parameters will be cleared to the <br>FACTORY DEFAULT CONFIGURATION <br>and the communications adapter will <br>REBOOT.
CLR_ALL = Clear All
